CD balloon hovercraft Make this happen very simple project to generate a floating disc that will skims
across a surface exactly like the way an air flow hockey puck as well as
hovercraft does.
What exactly you need:
Blank CD or CD that you do not
want any additional.
Pop-top cap coming from a water bottle as well as dish
soap package
Balloon
Hot glue rifle
What You Accomplish:
Use the
scorching glue gun for you to carefully glue your bottle cap in the center hole
in the CD and allow it to go set. Make confident the edges are generally fully
sealed.
Force the pop-top hat closed. Blow up the balloon, then hold it to
ensure no air escapes, but don't tie up it off. Stretch the mouth in the balloon
over your bottle cap (you might require an assistant that may help you do this
so that you can don't lose any air through the balloon). Now adjust the balloon
in order that it stands up direct and centered.
Set the hovercraft with a
hard, smooth kitchen table and open your pop-top; then nudge the product along
and see how are you affected.
What Happened:
A hovercraft operates by
forcing air out and about beneath it, setting up a cushion of air flow to float
in. Hovercrafts usually have a very "skirt" that surrounds the camp to contain
air; in this undertaking the CD can be light enough who's doesn't need a huge
cushion, so no skirt is critical. The balloon acts as being a pressurized gas
slot provided. When you wide open the cap, the balloon allows air out over the
cap, creating a skinny cushion of air within the CD.
As anyone nudged
your hovercraft all-around, you may have remarked that it zipped down the
surface like the air hockey puck. That's because air flow hockey uses a similar
principle, with the puck floating with a layer of air flow. In the case
associated with an air hockey kitchen table, the air is forced out of your table
below rather than source above as being a hovercraft. Try pushing an ordinary CD
across your table, and after that your hovercraft. Do both the move differently?
That's for the reason that thin cushion of air through the hovercraft reduces
the friction relating to the CD and your table. Because in the reduced friction,
hovercrafts could reach higher data transfer rates.
Experiment ideas:
Test to see should your hovercraft works differently in case you open
the hat only part way instead of all the so-called way.
Try distinct sizes of
balloons. Does the hovercraft run longer with a larger balloon?
Hovercrafts
work ideal on smooth surfaces hence the air can propagate evenly, but research
yours on several unique surfaces to see how it behaves. Should it work on a new
sidewalk or rug?
Home »
How to make a CD balloon hovercraft
» How to make a CD balloon hovercraft